Shandong Modern International Trade Co., Ltd.
Strict quality guarantee system & perfect management system
Add to Cart
Product Description:
Item: Stainless Steel Bar
Standard: ASTM A276, ASTM A484, ASTM A582
Material: 301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 321, 329,201,630,904L,405,409,430,434,444,403,410,420,440A,440B,440C.
Specifications:
Round Bar, diameter 1~1500mm.
Flat bar, thickness 0.1~100mm, width 3~1500mm.
Square bar, 1x1mm~800x800mm
Length: 2m, 3m, 5.8m, 6m,etc.
Surface: Black, peeled, polishing, bright, sand blast, hair line, etc.
Stainless Steel Bright Round Metric (BRM), Stainless Steel shaft bars for use in Valve Shafts, Piston Shafts, Pump Shaft, Cylinder Shafts, Boat Shafts and Bearing Bars. Stainless Steel Drawn bars have greater size accuracy, straightness, and increased tensile and yield strength, as well as improved machinability. In addition to standard Stainless Steel cold drawn bars, it can be supplied as turned and polished, turned ground and polished and drawn ground and polished in shape.
So, if 304L is weaker than standard 304 stainless steel, why would anyone want to use it?
The answer is that the 304L alloy’s lower carbon content helps minimize/eliminate carbide precipitation during the welding process. This allows 304L stainless steel to be used in the “as-welded” state, even in severe corrosive environments.
If you were to use standard 304 stainless in the same way, it would degrade much faster at the weld joints.
Basically, using 304L eliminates the need to anneal weld joints prior to using the completed metal form—saving time and effort.
In practice, both 304 and 304L can be used for many of the same applications. The differences are often minor enough that one isn’t considered massively more useful over the other. When stronger corrosion resistance is needed, other alloys, such as grade 316 stainless steel, are usually considered as an alternative.
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8” – 3.00” | h8-h9-h10-h11, ASTM A276 |
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6” – 2.50” | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50” – 6.00” | h11, ASTMA-484 h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00” | h9-h10-h11, ASTM A276 |
Chemical Composition:
| Chemical composition of stainless steel | ||||||||||||
| standard name | chemical composition | |||||||||||
| ASTM | EN | GB | JIS | KS | C (carbon) | Si (silicon) | Mn (manganese) | Cr (chromium) | Ni (nickel) | S (sulfur) | P (phosphorus) | others |
| 201 | 1.4372 | 1Cr17Mn6Ni5N | SUS201 | STS201 | ≤0.15 | ≤1.0 | 5.5~7.5 | 16.0~18.0 | 3.5~5.5 | ≤0.030 | ≤0.060 | N:≤0.025 |
| 202 | 1.4373 | 1Cr18Mn8Ni5N | SUS202 | STS202 | ≤0.15 | ≤1.0 | 7.5~10.0 | 17.0~19.0 | 4.0~6.0 | ≤0.030 | ≤0.060 | N:≤0.025 |
| 301 | 1.4319 | 1Cr17Ni7 | SUS301 | STS301 | ≤0.15 | ≤1.0 | ≤1.0 | 17.0~18.0 | 6.0~8.0 | ≤0.200 | ≤0.020 | - |
| 304 | 1.4301 | 0Cr18Ni9 | SUS304 | STS304 | ≤0.08 | ≤1.0 | ≤2.0 | 17.0~19.0 | 8.0~11.0 | ≤0.030 | ≤0.035 | - |
| 321 | 1.4541 | 1Cr18Ni9Ti | SUS321 | STS321 | ≤0.12 | ≤1.0 | ≤2.0 | 17.0~19.0 | 8.0~11.0 | ≤0.030 | ≤0.035 | Ti:5C~7.0 |
| 304L | 1.4306 | 00Cr19Ni10 | SUS304L | STS304L | ≤0.03 | ≤1.0 | ≤2.0 | 18.0~20.0 | 8.0~12.0 | ≤0.030 | ≤0.035 | - |
| 309S | 1.4833 | 0Cr23Ni13 | SUS309S | STS309S | ≤0.08 | ≤1.0 | ≤2.0 | 22.0~24.0 | 12.0~15.0 | ≤0.030 | ≤0.035 | - |
| 310S | 1.4845 | 0Cr25Ni20 | SUS310S | STS310S | ≤0.08 | ≤1.0 | ≤2.0 | 24.0~26.0 | 19.0~22.0 | ≤0.030 | ≤0.035 | - |
| 316 | 1.4401 | 0Cr17Ni12Mo2 | SUS316 | STS316 | ≤0.08 | ≤1.0 | ≤2.0 | 16.0~18.0 | 10.0~14.0 | ≤0.030 | ≤0.035 | Mo:2.0~3.0 |
| 316L | 1.4404 | 00Cr17Ni14Mo2 | SUS316L | STS316L | ≤0.03 | ≤1.0 | ≤2.0 | 16.0~18.0 | 12.0~15.0 | ≤0.030 | ≤0.035 | Mo:2.0~3.0 |
Product Photos:
