Shandong Modern International Trade Co., Ltd.
Strict quality guarantee system & perfect management system
Add to Cart
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082 is the alloy most commonly used for machining.
1. Material: 1060,2024,5052,6061,6063,7075,etc
2. Temper: Mainly in T5/T6
3. Finish:
1) mill finish
2) anodizing: Such as silver anodizing, mat anodizing, gold anodizing,
3) powder coating (needed to be provide Panton Color No., such as RAL9001)
4) sand spray
4. Price: A00(SMM)+Processing fee
5. Length: Different finish different length, for mill finish, any length we can make
6...Packing:
1)each in a poly bag with reasonable pieces into a carton /paper
2) naked with reasonable pieces packed with paper only at two ends
3)according to customers packing requirement, design the reasonable packing
7...Trade term FOB SHANGHAI/NINGBO, CIF or CNF to the appointed port
8...Payment: 30% deposit +70% before the delivery or against the copy of B/L, other payment should be discussed
9. Delivery: Within one month after the deposit,
10. Sample delivery: Three weeks( two weeks for mould +one week making sample )
11. OEM/ODM production.
12. It is better we can get your drawing or sample, we mainly make according to your design, and we can keep confidential for your design
Chemical Composition Compared:
| Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti |
| 1050 | 0.25 | 0.05 | <0.40 | <0.05 | <0.05 | <0.05 | - | <0.03 |
| 3003 | 0.6 | - | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.10 | - | - |
| 5052 | 0.25 | 2.2-2.8 | 0.4 | 0.1 | 0.1 | 0.10 | 0.15-0.35 | - |
| 5083 | 0.4 | 4.0-4.9 | 0.4 | 0.1 | 0.4-1.0 | 0.25 | 0.05-0.25 | 0.15 |
| 6005 | 0.6-0.9 | 0.4-0.6 | <0.35 | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 |
| 6061 | 0.4-0.8 | 0.8-1.2 | <0.70 | 0.15-0.4 | <0.15 | <0.25 | 0.04-0.35 | <0.05 |
| 6063 | 0.2-0.6 | 0.45-0.9 | <0.35 | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 |
| 6082 | 0.7-1.3 | 0.6-1.2 | <0.50 | <0.1 | 0.4-1.0 | <0.2 | <0.25 | <0.10 |
| BS EN 755-2:2008 | |
|---|---|
| Property | Value |
| Proof Stress | 110 Min MPa |
| Tensile Strength | 205 Min MPa |
| Elongation A50 mm | 12 Min % |
| Hardness Brinell | 70 HB |
| Elongation A | 14 Min % |
Product Photos:
